ЗАлоченный винт

Пароль на блинах пишется :)

For those of us using Linux, we have written an isd200 driver patch for unlocking the disk. This modified driver will automatically unlock the disk when you connect your Archos via USB, so you don't have to do anything special. Apply the patch to a 2.4.18 linux kernel tree.

The disk lock is a built-in security feature in the disk. It is part of the
ATA specification, and thus not specific to any brand or device.

A disk always has two passwords: A User password and a Master password. Most
disks support a Master Password Revision Code, which can tell you if the
Master password has been changed, or it still the factory default. The
revision code is word 92 in the IDENTIFY response. A value of 0xFFFE means
the Master password is unchanged.

A disk can be locked in two modes: High security mode or Maximum security
mode. Bit 8 in word 128 of the IDENTIFY response tell you which mode your
disk is in: 0 = High, 1 = Maximum.

In High security mode, you can unlock the disk with either the user or
master password, using the "SECURITY UNLOCK DEVICE" ATA command. There is an
attempt limit, normally set to 5, after which you must power cycle or
hard-reset the disk before you can attempt again.

In Maximum security mode, you cannot unlock the disk! The only way to get
the disk back to a usable state is to issue the SECURITY ERASE PREPARE
command, immediately followed by SECURITY ERASE UNIT. The SECURITY ERASE
UNIT command requires the Master password and will completely erase all data
on the disk. The operation is rather slow, expect half an hour or more for
big disks. (Word 89 in the IDENTIFY response indicates how long the
operation will take.)

Airton писал(а)
есть . ставится АТА командой .